(Part 1 of 2) This video demonstrates the DIY steps on how to replace your BMW’s Front Axle Hub-Bearing assembly.

(This was after I received a few Estimates on cost from different shops including a BMW dealership : between $800 to $1,250 plus tax.)

Tools needed:
Jack and JackStands
Slotted screwdriver
Hammer
8mm Hex
10mm deep socket
16mm socket
17mm deep socket
Bearing-race Installer
Ratchet extension
36mm socket
46mm socket
Torque wrench (that can hit 250 ft. lbs)
3-Jaw Puller (locking)

Quick Link – Part 2 of 2

Legal Disclaimer – Do this at your own risk. Follow all Safety Procedures. Wear Eye Protection! Wear mechanics gloves if possible. Not responsible if you break anything (Yourself or Property)

This DIY was performed on a 02 BMW E46 330i automatic, alpine white paint, with Sport Suspension Package, you know the drill. So if that is not your vehicle, there might be differences.